PERFORMANCE

Non-sparking wrench can be also used in marine enginerring,the material is aluminum bronze or beryllium copper.

Be-Cu:

Suitable for hydrogen with concentration below 21%,standard code GBEX ⅡC

Hardness is not less than HRC35,Tensile strength δ b 105-120kgf/mm2

Beryllium copper alloy with anti-magnetic performance.

Al-Cu:

Suitable for ethylene with concentration below 7.8%,standard code GBEX ⅡB

Hardness is not less than HRC25,Tensile strength δ b 75-85kgf/mm2

Non sparking spanner,Explosion proof Tools

The material of non sparking tools: Al-Br(QAl11-4-4), Be-Cu(QBe2)

Be-Cu: the color is green lake,hardness is not less than HRC35,tensile strength δ b 105-120kgf/mm2;standard code GBEX ⅡC,suitable for hydrogen with concentration 21.0±2.0%.Beryllium copper alloy with anti-magnetic performance.

Al-Cu: the color is bluish yellow,hardness is not less than HRC25,tensile strength δ b 75-85/mm2;standard code GBEX ⅡB,suitable for ethylene with concentration 7.8±0.5%,GBEX ⅡA (propane 6.5±0.5%),Ⅰ（methane 6.5±0.5%）。

Non sparking tools of XIN DA are made of high strength copper alloy.This kind hand tools can effectively prevent burning and explosion accidents caused by friction and collision between tools and tools in the flammable and explosive workplace.The explosion-proof performance received the certificates according to the national standard GB10686-2003, with the function of high intensity and good toughness.

The products are widely used in petroleum,chemical industry,mining,gas,coal,oxygen-producing,pharmacy,smelting,powder,leather,airplane,marine engineering etc,suitable for warehouse that operate flammable and explosive products,electrolytic workshops,communication assembly workshops,and requires that the tools are not rusty,wear-resistant and anti-magnetic during the checking process.